Powersoft K20 2-Channel High Performance Power Amplifier

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$4,600.00 $4,000.00

Powersoft Advanced Tech K20 Features:
Weight and space saving: unequaled, extremely efficient switch mode PSU and Class D design in only one rack space (1U) and 12kg/26.5lbs
Power saving: more amp output power from the AC power distro thanks to >90% efficiency, resulting in more overall power from less rack space1)
Fewer amplifiers for more speakers: designed for, stable and sounding consistently good with 2O loads
Outstanding sonic quality per design, including patented output filters
Highly integrated: internal state-of-the-art DSP optional
Versatile: large number of amp/system/venue parameters can be configured, locked, and monitored
Communicative: serial PC interface on board; Ethernet interface including AES3 over Cat-5e optional (KAESOP) for complete remote monitoring and control
Powersoft Advanced Tech K20 Specifications:
Number of channels 2
Output power (EIAJ test, 1 kHz, 1% THD)
2 x 9,000W @ 2 ohms
2 x 5,200W @ 4 ohms
2 x 2,700W @ 8 ohms
1 x 18,000W @ 4 ohms bridged
1 x 10,400W @ 8 ohms bridged
Max. output voltage: 225 V(peak)
Max. output current: 125 A(peak)
AC MainsPower
Power supply: Universal, regulated switch mode with PFC (Power Factor Correction)
Operating voltage: 100-240 V ±10%, 50/60 Hz
Power factor cos: >0.95 @ >500 W
Input impedance: 10 kOhms balanced
Frequency responseL 20 Hz – 20 kHz (1 W @ 8 O, ±0.5 dB)
THD+N / SMPTE IMD / DIM100 IMD: < 0.5% from 1 W to full power (typically < 0.05%) S/N ratio: >110 dBA (20 Hz – 20 kHz, A weighted)
Crosstalk separation: >66 dB @ 1 kHz
Slew rate: 50 V/µs @ 8 ohms input filter bypassed
Damping factor: >5000 @ 20 – 200 Hz
Front Panel
Indicators: 7 meter LEDs: 5 x green, 1 x yellow, 1 x red, top yellow and red show alarm with protect description on LCD panel
Controls: 4 push buttons, function depending on user menu
Maintenance: SmartCard reader/writer for firmware updates and preset storage.
Easily accessible dust filter foam behind two steel covers
Rear Panel
Audio signal input connectors: Analog: 2 x balanced Neutrik® Combo XLR female/1/4” jack; AES3: use channel 2 XLR
Loudspeaker output connectors: 2 x Neutrik® Speakon NL4MD
Network data port RS485: 1 x RJ45 with 2 recessed rotary encoders for ID selection
Aux voltage: 1 x 2-pin Phoenix P. 3.81mm
AC mains: AMP CPC 45A on rear panel; AMP CPC 45A connector mounted on a 3 x 5mm2 (10AWG) cable
Controls: 1 x link switch, linking analog inputs 1 and 2
AES3/analog input switch
Dimensions (WxHxD): 19″ x 1U x 18.7″
Weight: 26.5 lbs
0.04″ steel chassis and removable dust cover
0.12″ steel front panel, screw hole protection, side reinforcement & rear support


The Powersoft Advanced Tech K20 impresses with up to 18,000W (in 4 ohm mono-bridged mode) in a single rack space, making it probably the most powerful amplifier at its size, and definitely the most powerful model within the K Series, the most advanced line of power amplifiers from Powersoft. This model is the 2-channel version delivering 9000W – making it ideal for large-scale touring systems for use in stadiums, open-air events, arenas and large concert venues.

Ideal for subwoofers requiring relatively high continuous power and ample headroom, the K20 is the unique result of smart design, attention to sound quality, and extremely high efficiency with reliability, portability, and adaptability in mind. In use worldwide by leading touring and event sound companies, K Series is preferred among the top ranking system designers, sound engineers, and system techs on the road for making their lives easier, giving them reliable premier-grade power and headroom in the smallest possible package size.

Fully digitally controlled and with a serial PC communication port as standard, the K20 is also available with either or both KDSP board and KAESOP Ethernet/AES3 interface. Fully equipped with both options, the K20 DSP+AESOP amounts to a fully integrated, highly sophisticated yet easy to use power source including state-of-the-art sound shaping and system management capabilities, remotely controllable via Powersoft’s Armonía Pro Audio Suite™ software.

Interface available for MediaMatrix, Crestron, AMX, and Q-Sys control and monitoring systems.

1 review for Powersoft K20 2-Channel High Performance Power Amplifier

  1. Rated 5 out of 5

    Sergio Gabriel

    El pedido fue entregado a mi domicilio el cuarto día, muy recomendado.Salta, Argentina

Add a review

Your email address will not be published. Required fields are marked *